Windows 10 upgrade stuck at 46
Windows 10 Setup Stands 46
Windows 10 is the latest Windows system. Most people prefer to use it. However, it is not perfect. It has a major problem “Windows 10 upgrade stuck at 46″. You will also encounter many problems when using it, especially when updating a system, such as Windows 10 update delayed restart, etc.
Today, we are talking about another issue – Windows 10 upgrade stuck at 46. Let’s take a look at the case users are facing.
Now, it’s time to see how you can fix the “Windows 10 upgrade stuck at 46” with the troubleshooting guide listed below.
How to fix Windows 10 upgrade stuck at 46
Before attempting the following solutions, it is best to remove any external device connected to the PC and disconnect any USB device such as mouse or keyboard, portable hard disk, etc.
Since your PC is stuck in the setup screen, you should restart your computer in Safe Mode before performing any tasks. Windows 10 bootable media such as DVD / USB bootable drive can be used to install WinRE to enter Safe Mode. Follow the steps below:
Step 1: Install Windows to install a CD / DVD or USB boot drive on your computer, and start your PC.
Step 2: Enter the BIOS. Detailed instructions are presented in this post – How to Install BIOS Windows 10/8/7 (HP / Asus / Dell / Lenovo, any PC).
Step 3: Select a DVD or USB flash drive as the startup device and turn on your PC on the device.
Step 4: Click Fix your computer to successfully enter WinRE.
Now, you can continue to install Safe Mode.
Step 1: From the Select screen option, click Troubleshoot> Advanced Options> Getting Started.
Step 2: Then, click the Restart button. Now, there are plenty of startup options. You need to press the F4 key to turn on Safe Mode.
Now your PC will restart in Safe Mode. After that, you can try the “Windows 10 setup” check and check for updates to issue 46 “.
Top 3 Best gaming desk in 2022 | Secretlab Magnus | Walker Edison Soreno Metal Desk | Arozzi Arena Play Desk
Fix 1: Turn off Antivirus Software
Antivirus software may cause the “Windows 10 upgrade stuck at 46” error. Therefore, you need to disable Windows Defender Firewall and third-party antivirus software. Now, let’s see how you can turn off Windows Defender Firewall.
Step 1: Open the Windows Run program and install a firewall.CPL, then click OK to open the Windows Defender Firewall.
Step 2: Click Open or Close Windows Defender Firewall to open Customize Settings.
Step 3: Select both options to close the Windows Defender Firewall (not recommended) and press the OK button.
After that, you need to disable third-party antivirus software, such as Avast. Follow this post – Best Ways to Disable Avast for PC and Mac Temporary / Completely to Disable it.
After that, you can re-use the Windows update and check that the “Windows 10 upgrade stuck at 46” has been fixed. If not, try the following solution.
Fix 2: Free Space
Windows Updates can use more disk space. Then you can fix the “Windows 10 set up 46″ issue by freeing up hard drive space.” issue by freeing up hard drive space. Here’s how to do it:
Step 1: Open Control Panel. Click the Programs and Features section.
Step 2: Right-click the program you want to uninstall to select Uninstall. Then follow the given instructions to uninstall the program to free more space.
This can help free up a lot of space if you have a lot of programs that can be used on your computer. Then, check to see if the “Windows 10 upgrade stuck at 46” has been fixed.
Fix 3: Make a Clean Boot
Software conflicts can also cause problems. Therefore, you can make a clean boot to remove the problem. To make a clean boot, you need to make:
Step 1: Type MSConfig in the Run box, and then click OK.
Step 2: Then go to the Services tab. Go to the Hide All Microsoft box.
Step 3: Now, click the Disable All button, then click Apply to save the change.
Step 4: Navigate to the launch tab and click Open Task Manager.
Step 5: In the Task Manager tab, select the first enabled program and click Disable. Here you need to disable all enabled apps individually. After shutting down all programs, close Task Manager and click OK.
Now, restart the computer to update the Windows again. Maybe an error “Windows 10 upgrade stuck at 46” will solve in clean startup mode.
Fix 4: Launch Windows Update Troubleshooter
If “Windows 10 upgrade stuck at 46” still appears, then you must use the Windows Update Troubleshooter. Follow the given steps:
Step 1: Press the Windows key and lock it together to open the Settings app.
Step 2: Then go to the Troubleshoot tab and select Windows Update.
Step 3: Click Start Troubleshooter to continue. Then Windows Update Debugger will start detecting problems. It may take some time.
Step 4: Then click Apply this fix.
Then Windows Update Troubleshooter will continue to detect and fix the problem. Once the whole process is complete, you will need to restart your computer to run the Windows update again to check if the problem has been resolved.
Maybe the problem “Windows 10 upgrade stuck at 46” has been fixed. If not, try the next solution.
Fix 5: Rename Software Distribution Folder
The next step is for you to rename the SoftwareDistribution folder. Here’s how to do it:
Step 1: Type Command Prompt in the Search box, then right-click the first result to select Run as administrator.
Step 2: Now type the following instructions one by one to stop Windows Update Services and press Enter one after the other:
net stop wuauserv
net stop cryptic
net stop bits
net stop msiserver
Step 3: Next, type the following command to rename the SoftwareDistribution folder and press Enter.
Step 4: Finally, start Windows Update Services and press Enter one after the other: Restart your PC and check that “Windows 10 set up 46” has a problem gone net start wuauserv net start cryptic net start pieces net start msiserver.
This is it for today’s article on “Windows 10 upgrade stuck at 46”, hope your problem I solved by any of the above methods!
For more details and the latest updates, visit Instachronicles.